Vmail Home Where to Buy
 
Storage Media - Verbatim
Notch

Wireless Mouse set up instructions:


  1. Connect the USB RF Receiver to the USB port
  2. Ensure the batteries are installed in the mouse
  3. Click the ID button on the receiver once. The red LED will start to flash
  4. Next, click the ID button on the underside of the mouse
  5. The red LED on the receiver will flash rapidly for a few seconds then stop flashing
  6. Now the mouse is ready for use
  7. To switch the mouse off, hold in the ID button on the mouse for 3 seconds until the LED flashes once.

Mouse Installation and Software Instructions are included on the CD

 

 


Sitemap About Verbatim Contact Us Support Press Info Technologies
Environment Environment
Vmail Join today!
LEFT CURVE   RIGHT CURVE
Copyright © 2010 Verbatim Ltd. All Rights Reserved.
"Verbatim" and logo are the trademarks of Mitsubishi Kagaku Media Co., Ltd. registered in EU and other countries.
1MB = 1,000,000 bytes 1GB = 1,000,000,000 bytes. Some of the capacity is used for formatting and other functions, and thus is not available for data storage.