Verbatim LED GU10 6W 2700K 400lm

Product Number: 52312

  • GU10 Socket
  • 220-240V
  • 40,000 hours Lifetime
  • Dimmable
  • 89% Energy Saving
  • Luminous Flux: 420 lm
  • Equivalent to 57W incandescent bulb


Lighting Industry Association

GU10

420lm

6.0W

= 57W Incandescent Replacement

Warm White 2700K

 
Product Number 52312
General Data
Lamp Socket GU10
Design PAR16 GU10
Power supply
Fitting
Installation type
Electric Data
Wattage (W) 6.0
Wattage Equivalent (W) 57
Voltage (V) 220-240
Dimmable yes
Instant-on yes
Power Factor ≥0.7
Operating Frequency (Hz) 50/60
Current (mA) 38
Geometric Data
Length (mm) 56
Outer diameter (mm)
Inner diameter (mm)
Width (mm)
Height (mm)
Diameter (mm) 50
Weight (g) 55
A1 (Fixation) mm
A2 (Fixation) mm
Photometric Data
Luminaire efficiency
Luminous Flux (lm) 420
led- Luminous Flux 120° Cone
CRI 80
CCT (K) 2700
Lumious intensity (cd) 1000
Beam Angle (°) 35
Luminous Efficacy (lm/W) 70
Lifetime (h) 40,000
Switching Cycle 100,000
Lumen Maintenance Factor (LMMF) - given as a %
Colour Consistency (+ / - K)
Starting Time (milliseconds)
Warm Up Time (milliseconds)
UGR
Energy efficiency parameter
Energy Efficiency Class A+
Mechanical Parameters
Safety class
Glow wire test
Flammability
Housing material
Housing colour
Protection class
52312 Global Energy Rating Label ol

Better light with less energy

Household lighting in Europe is becoming greener as the European Union sets higher energy efficiency standards.

On 1 September 2009, incandescent light bulbs and other energy inefficient lamps started to be gradually replaced by more energy efficient lamps in Europe. By switching to more energy efficient lighting products, European households can save energy and contribute to reaching the EU’s climate protection targets.

From 1st Sept 2013 onwards a new EU directive concerning Energy labeling (No 874/2012) will be active. With it, a new Energy label for lamps including LED lamps will be released which will push energy efficiency classes up to A+ & A++ for lighting solutions.

Product Summary


A high performance GU10s spot LED with single focus diamond cut optics for perfect beam control and minimal glare. It uses a special heat-sink designed by Mitsubishi Chemical which provides exceptional thermal management resulting in high lumen output and long-term reliability. Its chip on board (COB) LED technology enhances thermal resistance, delivering a better lighting effect and high light efficacy. The lamp bestows all the energy saving benefits of LED lighting together with consistent and reliable colour uniformity.

Dimmability depends on transformer/dimmer combination. Electronic transformers have a minimum load requirement.

Application

Ideal for general lighting in public areas such as reception, corridors, lobbies, conference rooms and other areas where bright light is required  for long periods.

 

Where to Buy

Display stores with product availability


Verbatim MDISC Compatibility Chart

Verbatim LED GU10 6W 2700K 400lm


Product Number: 52312

52312 Global No Packaging Side Angled Reflection


  • GU10 Socket
  • 220-240V
  • 40,000 hours Lifetime
  • Dimmable
  • 89% Energy Saving
  • Luminous Flux: 420 lm
  • Equivalent to 57W incandescent bulb


Lighting Industry Association

GU10

420lm

6.0W

= 57W Incandescent Replacement

Warm White 2700K

 
Product Number 52312
General Data
Lamp Socket GU10
Design PAR16 GU10
Power supply
Fitting
Installation type
Electric Data
Wattage (W) 6.0
Wattage Equivalent (W) 57
Voltage (V) 220-240
Dimmable yes
Instant-on yes
Power Factor ≥0.7
Operating Frequency (Hz) 50/60
Current (mA) 38
Geometric Data
Length (mm) 56
Outer diameter (mm)
Inner diameter (mm)
Width (mm)
Height (mm)
Diameter (mm) 50
Weight (g) 55
A1 (Fixation) mm
A2 (Fixation) mm
Photometric Data
Luminaire efficiency
Luminous Flux (lm) 420
led- Luminous Flux 120° Cone
CRI 80
CCT (K) 2700
Lumious intensity (cd) 1000
Beam Angle (°) 35
Luminous Efficacy (lm/W) 70
Lifetime (h) 40,000
Switching Cycle 100,000
Lumen Maintenance Factor (LMMF) - given as a %
Colour Consistency (+ / - K)
Starting Time (milliseconds)
Warm Up Time (milliseconds)
UGR
Energy efficiency parameter
Energy Efficiency Class A+
Mechanical Parameters
Safety class
Glow wire test
Flammability
Housing material
Housing colour
Protection class

52312 Global Energy Rating Label ol

Better light with less energy

Household lighting in Europe is becoming greener as the European Union sets higher energy efficiency standards.

On 1 September 2009, incandescent light bulbs and other energy inefficient lamps started to be gradually replaced by more energy efficient lamps in Europe. By switching to more energy efficient lighting products, European households can save energy and contribute to reaching the EU’s climate protection targets.

From 1st Sept 2013 onwards a new EU directive concerning Energy labeling (No 874/2012) will be active. With it, a new Energy label for lamps including LED lamps will be released which will push energy efficiency classes up to A+ & A++ for lighting solutions.




Product Summary
A high performance GU10s spot LED with single focus diamond cut optics for perfect beam control and minimal glare. It uses a special heat-sink designed by Mitsubishi Chemical which provides exceptional thermal management resulting in high lumen output and long-term reliability. Its chip on board (COB) LED technology enhances thermal resistance, delivering a better lighting effect and high light efficacy. The lamp bestows all the energy saving benefits of LED lighting together with consistent and reliable colour uniformity.

Dimmability depends on transformer/dimmer combination. Electronic transformers have a minimum load requirement.

Application

Ideal for general lighting in public areas such as reception, corridors, lobbies, conference rooms and other areas where bright light is required  for long periods.